Load data for 9 mm Steyr (Roth) + .356 | 125gr | H&N SWC HS

Recommended Powder(s):

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.356 \| 125gr \| H&N SWC HS
Bullet Weight:	125gr \| 8.1g
Bullet Diameter:	0.356" \| 9.04mm
Bullet Length:	<<locked>>
Caliber:	9 mm Steyr (Roth) load data
Case Length (l3):	0.913" \| 23.2mm
Cartridge Length (C.O.L.):	<<locked>>
Seated Depth:	<<locked>>
Shank Seated Depth:	<<locked>>
Case Capacity:	17.4 Grains of Water \| 1.13 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	19580 psi \| 1350 bar
LID:	LID_B7455_C1226
Last updated:	2026-02-08

Load data for 46 loads in caliber 9 mm Steyr (Roth) with .356 | 125gr | H&N SWC HS bullet and 23 powder(s). The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
[ADI AP 100]*	<<locked>>	83%	17376	89%	**70	82%
Accurate Solo 1250	<<locked>>	66%	17027	87%	**24	100%
Alliant BE-86	<<locked>>	66%	17463	89%	**33	100%
Alliant Herco	<<locked>>	80%	17303	88%	**73	97%
Alliant UNIQUE	<<locked>>	67%	17376	89%	**73	97%
Baschieri & Pellagri 102 Pistol	<<locked>>	81%	17608	90%	**24	100%
Hodgdon CFE Pistol	<<locked>>	64%	17535	90%	**40	100%
Lovex S020 👍	<<locked>>	62%	17608	90%	**56	99%
Maxam CSB 1	<<locked>>	69%	17332	89%	**20	100%
Maxam CSB 2	<<locked>>	68%	16955	87%	**47	100%
Maxam CSB 3	<<locked>>	63%	17477	89%	**07	100%
ReloadSwiss RS 20 👍	<<locked>>	71%	17492	89%	**93	99%
[Rottweil P 806]*	<<locked>>	85%	17347	89%	**84	89%
SNPE Vectan A0	<<locked>>	68%	17361	89%	**27	97%
[SNPE Vectan BA7 1/2]*	<<locked>>	75%	17216	88%	**50	89%
SNPE Vectan BA9 1/2	<<locked>>	63%	17593	90%	**37	100%
[SNPE Vectan SP 2]*	<<locked>>	69%	17390	89%	**38	84%
Somchem MS200	<<locked>>	64%	17347	89%	**43	98%
Vihtavuori 3N37	<<locked>>	71%	17318	88%	**86	91%
Vihtavuori N32C Tin Star	<<locked>>	83%	17608	90%	**1	100%
Vihtavuori N330	<<locked>>	64%	17477	89%	**63	100%
Vihtavuori N340	<<locked>>	67%	17347	89%	**53	97%
Vihtavuori N350	<<locked>>	74%	17492	89%	**86	91%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
[ADI AP 100]*	<<locked>>	79%	15592	80%	**24	80%
Accurate Solo 1250	<<locked>>	61%	14634	75%	**8	99%
Alliant BE-86	<<locked>>	61%	14808	76%	**4	100%
[Alliant Herco]*	<<locked>>	60%	9819	50%	**0	88%
Alliant UNIQUE	<<locked>>	61%	14170	72%	**1	94%
Baschieri & Pellagri 102 Pistol	<<locked>>	62%	10037	51%	**6	100%
Hodgdon CFE Pistol	<<locked>>	61%	15954	81%	**07	99%
Lovex S020	<<locked>>	60%	16375	84%	**33	98%
Maxam CSB 1	<<locked>>	62%	14083	72%	**8	99%
Maxam CSB 2	<<locked>>	60%	13010	66%	**8	100%
Maxam CSB 3	<<locked>>	61%	16302	83%	**8	100%
ReloadSwiss RS 20	<<locked>>	61%	12575	64%	**1	95%
[Rottweil P 806]*	<<locked>>	74%	11313	58%	**10	80%
SNPE Vectan A0	<<locked>>	61%	14214	73%	**8	94%
[SNPE Vectan BA7 1/2]*	<<locked>>	61%	11414	58%	**6	81%
SNPE Vectan BA9 1/2	<<locked>>	61%	16433	84%	**10	100%
[SNPE Vectan SP 2]*	<<locked>>	64%	14634	75%	**60	81%
Somchem MS200	<<locked>>	60%	15185	78%	**8	96%
[Vihtavuori 3N37]*	<<locked>>	62%	12763	65%	**5	85%
Vihtavuori N32C Tin Star	<<locked>>	65%	10617	54%	**0	100%
Vihtavuori N330	<<locked>>	60%	15011	77%	**07	100%
Vihtavuori N340	<<locked>>	61%	14663	75%	**4	95%
[Vihtavuori N350]*	<<locked>>	62%	11574	59%	**9	83%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data